TayRose Design interior design Craft Project Archives

Owl Inspired Theme Toddler Bedroom

12 Feb 2018

Craft Project, DIY, Interior Design Room, Kids Room, Theme Room

#floating shelves, #painted tree mural, #placemat, #vintage linen, custom, decorator, designer, DIY, Home Decor, Home Design, owl, pillow, TayRose Design, theme room

B4 and after owl theme room

Evolving from a nursery to a toddler bedroom is always fun especially when there is a theme involved. Keeping the budget in mind, the client wanted owls to be the theme. With purchased artwork as inspiration, owl pillows; shelf sitters; a tree mural and floating shelves were added to the design.

Inspired owl artwork

A new trundle bed replaced the crib on the back wall. White furniture and ruffled curtains coordinated with the bed and trim. That left a huge blank focal wall behind the bed, just prime for a hand-painted tree mural. What better place for an owl to sit than in a tree!

The wall tree had limbs that reached towards the corner of the wall with added white floating shelves and green painted mini birdhouses for a bit of whimsy. A metal owl wall art piece was painted white to match the tree. Painting the tree, hanging the wall shelves plus accessorizing was complete in a day.

Painted tree mural

Starting Owl Pillows

For one of the owl pillows, I found a pair of woven green rectangular placemats that I purchased for under $2 each. Walmart had some nice inexpensive assorted cottons that are sold in packages just right for small projects. I chose colors that would coordinate with the pink, gray and white color scheme going on in the room. Vintage linens and cut up discarded clothing were used as fabric as well.

owl placemat pillow layout

The placemats were sewn on the vertical for the pillow with a couple of small feet at the bottom. Felt eyelashes, a suede beak from an old jacket, and cut out fabric circles made up the eyes and feet. All the pieces were sewn to the front side first before sewing the seams. Due to the fringed edges, I sewed the seams just as they lay with right side up. At the top ear corners, with a needle and thread, I tacked a couple of small stitches so they would “pinch” together like little ears. The suede beak was hand embroidered showing the hand stitches for that ” handmade” look.

owl placemat pillow ear

I cut the border edge of my vintage linen into strips to sew together as the “tummy”.

owl placemat pillow tummy

For the feet, I made a quick pattern, cut out fabric , pinked the edges, stuffed with fiberfill and sewn to bottom seam. Sew around all the edges with about a 5/8″ seam leaving about a 5″ opening to add stuffing. After filling with desired amount of stuffing sew the opening close and voila, pillow done!

owl placemat pillow finished

Shelf Sitters

As for the owl shelf sitters….making the patterns for the first time was challenging and then filling them with rice found more rice on floor than in the owl!

making pattern for owl shelf sitters

A pink and white feather boa from the Dollar Store was cut and sewn as little tufts to the ears for some texture and fun. These little owls definitely like to “sit” and not be played with by little hands, so they were set up high in the branches on shelves.

Owl shelf sitters finished

In Conclusion:

All in all, this was a very fun project, lots of room for additional accessories as the little one grows older without having to change too much, which is great for the budget.

“Who” would like to try and take on a theme room and watch it grow? Ahhh…..very wise…..

Owl theme toddler room finished

Create a “trunk” inspired look for a Nightstand

finished nightstand trunk inspired

I was commissioned to transform my client’s little girl’s room to a jungle theme room. They had originally seen and fell in love with the bedroom I had designed for the Parade of Homes recently.

It’s a Jungle in here! Parade of Homes Pigliavento Builder, TayRose Designs

My client had asked for a nightstand next to the bed rather than the lidded crate I had used in my previous showhome. I wanted to choose something that still had a feeling of traveling the ocean seas towards jungle paradise. I started shopping both online and in local shops but didn’t quite find what I had envisioned in my mind. So, I checked out my furniture stash of odds and ends pieces I’ve collected for future transformations on projects that come my way, and I found the perfect size night stand that had a drawer which my client had requested and room on top for a lamp and maybe even a book.

However, in its current color it would not work with the design. I kept thinking about travel and how I might be able to simulate the look of a trunk or suitcase for this furniture piece. I knew the orangey colored stain color was not going to work, so by using a palm sander and sand paper by hand, I sanded down to practically the raw color on the sides and front frame work so I could stain it a darker brown. I wanted to bring in some jungle green color and I thought that chalk paint would be great choice for it covers just about anything with little prep. I chose Spanish Moss chalk color from JoAnn Fabrics Folk Art series and I also picked up their clear wax as well to go over the paint to seal and protect the color. http://www.joann.com/folkart-home-decor-chalk-8-oz/13830781.html

http://www.joann.com/folkart-home-decor-wax—8-oz./zprd_13358940a.html#q=FOLK%2BART%2BCLEAR%2BWAX&start=1

Folk Art Chalk paint and wax

I also wanted to add details to my “trunk” so my inspiration came from age old steamer trunks that had wonderful leather straps and metal hardware. I haunted the local thrift stores for leather belts and picked out a few that I could cut up and apply with upholstery nails into the wood.

thrift store find belts

For metal accents, I found at Hobby Lobby perfect corner pieces that came with their own tiny nails to tap into the corners of the top and drawers. https://www.hobbylobby.com/Crafts-Hobbies/Wood-Crafting/Hardware-Tools/Antique-Bronze-Plated-Corners/p/80783525 and https://www.hobbylobby.com/Crafts-Hobbies/Wood-Crafting/Hardware-Tools/Antique-Bronze-Plated-Corners/p/80783621 For the front, I found at Lowes some brass cabinet latches that I could use that simulate trunk latches. https://www.lowes.com/pd/Gatehouse-2-Pack-Polished-Brass-Cabinet-Catch/3355522

hardware for trunk nightstand

The latches were a little too bright brass in color, so I sprayed on some brown paint and dabbed off with a rag to give more of an antiqued look. Now I was ready to start the staining and painting…….

I removed the drawers and sanded the fronts lightly for they were to be painted, then sanded the sides of the stand, the edges and inside the opening, then wiped down with a tacky cloth to remove sand dust. I had some leftover dark walnut stain from another project that I brushed on to the sides, edges and inside of the opening shelf then wiped off with a cloth to the desired color.

staining nightstand darker

I think I applied the stain twice after letting the first coat dry per can instructions.

I decided to paint the inside of the drawers in the Spanish Moss green chalk paint and since the little girl loved purple and polka dots, I thought having a surprise when the drawer opened would be a fun addition.

Inside drawer surprise dots

The top of the stand and the drawer fronts all got painted with the Spanish Moss and I applied 2 coats and only needed 1 jar, so the paint really goes a long way. After paint had dried I applied the clear wax over the painted surfaces according to jar instructions which was really easy and let dry. Over the stained areas I wiped on a poly with a cloth and let it dry as well.

I measured and cut the leather belts to fit down the top in 2 rows and down the front of the drawers as if the leather strap was one continuous strap. I used gorilla glue as well as upholstery nails to adhere cut straps to surfaces. For the latches, I placed the latch where I wanted to screw it down, then marked holes with a pen and started the hole with a small drill bit and screwed latch in place. I nailed the corner pieces to the top and drawer edges with the tiny nails included in the packages and then came the handles.

adding leather belts as straps

The original drawers had a wood knob right in the center and I wanted to have a handle. So, I needed to deal somehow with the hole in the center of the drawer. I could have tried to plug it with putty, but the drawer front was quite thick and it would take a lot of putty and challenging to get load it up into the smallish hole. I could have found a wood dowel to glue into hole then cut off, sand and then paint over too, but I just decided to use the hole rather than hide the hole. I found at Lowes the perfect length brass bolt with a rounded head that fit through the drawer and had a brass small nut on the other side…done. I lined up the handles and screwed them on the front.

I loved the way this little night stand turned out. Plenty of space for her to store her books, a reading lamp on top and her secret treasures tucked inside the dotted drawers. It feels great to transform a simple piece of furniture that may have been set aside for awhile, to a new usable piece with a new look that now fits in again!

jungle nightstand in room

Wallpaper Challenge…at least for me

I had an invitation asking if I would be interested in a new program called “Share-A-thon”. They were inviting a few contributors to try out a product and then “share” the step by step project to inspire others. When I heard it was wallpaper I was intrigued, for I have never used wallpaper before except to line drawers, so I thought this would be something new to try. We were sent a link to the product, who in this case is Walls Republic found here, http://www.wallsrepublic.com/ that have beautiful online candy for the eye, pages and dreamy pages of wallpaper samples (plus you can get up to 5 sample swatches for free). We had a list of samples to choose from and I chose a paper called Adeline in the color, Duck Egg #97411.

These papers use a newer, “paste to the wall” technology, where you paste the item you are attaching the paper to without having to paste the paper first. The papers are hung dry, so no soaking before hand…a nice one less step. Another awesome feature, is that the papers are dry strippable, which means they are easy to remove by just peeling back a corner and the whole paper comes off in one sheet….no more stripper and heaters and scrapers…just peel and go! Do you know how many times I have wanted to try wallpaper somewhere but because of the hassle to remove it I didn’t? This feature alone has me going room by room looking at the walls much differently now….

I started thinking about how I would use the wallpaper. I knew that I wanted to make something that would show what to do with remnants after papering a wall. I decided on 3 items: a chair, a hanging lamp and a bi-fold door. I figured that these items could be used in a bedroom, a large bath or guest room.

3 before items for wallpaper project

After 3 pieces wallpapered with Walls Republic wallpaper

For the chair, I needed to shellac the chair first so that the tannin pigment of the stain would not bleed through the chalky mineral paint I planned to use. I found 2 colors that matched very closely to the colors in the wallpaper from Country Chic paints- Cheesecake, and Elegance. I applied the blue Elegance in various areas so it would show through the creamy cheesecake color when I distressed it.

After painting on the blue Elegance color, I applied 2 coats of the cream Cheesecake color. After drying for a day, I did some distressing and more blending of the 2 colors as per product directions…Country Chic has great tutorials on their website, which is so helpful for us diy’s. For the finishing coat on the painted areas of the chair, I used the Country Chic natural wax brushed on lightly then buffed off with a clean cloth for a smooth finish

Since the chair seat was wood, I thought it would be perfect to cover with the wallpaper. Mind you, this chair is meant to be an “accent” chair, not really used to sit on, but as a holder of sorts which you will see how further in the post. Also, the thick spindles along the back of the chair would be a great place to try some appliques with the wallpaper as well as an outlined curve on the top of the chair. I pried up the chair seat and painted the seat with a latex primer/paint mixture in white that I already had on hand. I painted 2 coats just to be sure no bleeding after the shellac layer and 2 primer/paint coats.

Once thoroughly dried as per can instructions, I unrolled some of the wallpaper out and laid the wooden seat on the paper and cut out leaving about and inch width around the perimeter to turn under the seat. I set the seat up on some risers ( I used all the same size paint cans) and proceeded to lightly bend the paper down along the edges so I can see the outline of the seat and know where the paper is supposed to lie. I picked up the recommended paste that Walls Republic had suggested from Lowes, the Roman brand adhesive and I brushed a liberal amount to the top of the wooden chair seat. Trying not to get any paste/glue on the top of the paper was the biggest challenge, then proceeded to lay my cut out piece on the seat starting from the top and laying down, pushing gently the air bubbles to the sides as I lowered the paper all the way down. Then I took my wallpaper brush I picked up at the Dollar Store, yeah..and smoothed more bubbles out to the sides for smooth surface. If I did happen to get a bit of glue on the paper, I tried to wipe off quickly with a damp rag.

Once the paper was dry, I really let it set overnight, I decided the best way to secure the ends under the chair seat was to hot glue along the underneath edge and it worked fine. For a little more added protection, I brushed a coat of Modge Podge to the surface and it dried clear and didn’t affect the paper, which was a great relief! (I did sample the Modge Podge on a small scrap to be sure it didn’t discolor the paper before actually applying to wood seat)

I decided rather than use the same nail heads which most of them were bent anyway, I had some large headed silver nail heads that my husband pre-drilled small holes around the perimeter of the seat and then hammered in the tacks. I like how the little bit of shimmer in the paper picks up the shimmer of the metal nail heads.

There is a part of the chair at the top that is outlined and I thought this would be a great place for an accent of this pretty paper. I made a pattern of the area on tracing paper and cut the wallpaper and applied it in the same way…paste, smooth out bubbles, clean off glue, modge podge. For the spindles cut “appliques” from the wallpaper and pasted them to the front of the spindles, smoothing the paper out with my fingers and wiping up the excess glue. When dry, I trimmed off the edges that stuck out with a razor blade.

Here are a couple of ways to use this trio of wallpapered items- in the bath:

Also in a bedroom, to catch tossed off clothing…

You could also use the bi-fold doors hinged together as a headboard for a twin or queen sized bed.

All in all, I learned more about wallpaper than when I started this project, and working with this new type of wallpaper, I think I was spoiled. W

hat turned out as a challenge ended up easier than I thought….I have a feeling that as I look around the house, many things just may end up with a wallpaper accent somehow…. try it, you’ll like it!!

To read about the other posts on wallpaper, find them here: http://tayrose.com/2015/04/16/taking-a-vintage-pendant-and-adding-wallpaper-for-a-fresh-look/ http://tayrose.com/2015/04/16/how-to-wallpaper-a-bi-fold-door-to-use-as-a-headboard-or-screen/

http://www.eregalstudio.com/ credit for finished group photo of wallpapered items.

To receive posts via email click HERE Subscribe in a reader or signup in Subscription box in sidebar.

How to wallpaper a bi-fold door to use as a headboard or screen

I’m writing a trilogy of sorts-a series of projects using wallpaper as an accent with the remnants from wallpaper rolls after papering a wall. I will be sharing 3 projects; a chair, a lampshade and the project in this post is a bi-fold door. I was invited to participate in a program to try a product and then share how it works and hopefully inspire others. Since I never really used wallpaper before besides lining drawers, I jumped to the challenge. We were given some choices of papers from Walls Republic, found here, http://www.wallsrepublic.com/ and I’m telling you, they have so many beautiful papers to drool over, plus, if you have trouble deciding, they will ship up to 5 samples free so you can touch and feel the actual paper before purchasing a roll….such a great option! My paper choice was Adeline in Duck Egg which is a soft pretty blue color on a creamy white background. The paper is nice and thick and had a pretty sheen when the light hit it. We haven’t had any sign of Spring here in Upstate NY in March, so this wallpaper design was my way of bringing in a little Spring-

Wallpaper label from Walls Republic

One of the projects I decided to apply wallpaper to, was half of a bi-fold door set. My husband is a photographer and uses different items as back drops, and I thought this would be a great way to try wallpaper on a surface before applying it to a whole wall, since I was such a newbie with wallpaper. I laid down my drop cloth on top of a piece of masonite board on the floor in the photo studio and brought my sawhorses in….it was freezing out in the garage…March and snow….you know, Upstate NY…brrrr.

I decided to paint the raised panel side of the door and add wallpaper to the inside of the raised panels, and then on the other flat side I would lay a full sheet of the wallpaper. I found a lovely shade of blue paint color from Sherwin Williams, called Quietude #SW6212…isn’t that a great name? For the cream color in the background I chose a paint color from the Country Chic mineral chalk based line, Cheesecake, which matched the wallpaper nicely too.

Cheesecake mineral chalk based paint

After painting the edges, I traced out on paper the inner panel sizes and cut out the shapes on the wallpaper. The other great thing about this wallpaper is they have a newer technology where you don’t have to paste the back of the wallpaper, but apply the paste to the item you are papering. You can still apply the paste to the back of the paper if you want to, but with these newer papers you don’t have to do that step. The adhesive paste that Walls Republic recommended is Romans and you can find it at Lowe’s but any good wallpaper adhesive should work, and if you have any questions, Walls Republic has great customer service.

Also, included with the wallpaper roll, are instructions, complete with drawings, which is so helpful for me who has to have a visual to see how something is done.

Once I had all my wallpaper patterns cut out, I brushed the adhesive paste to the raised panels and lined up my paper to the edge of the panel and slowly laid down the paper, smoothing gently as I laid it down, pushing the air bubbles to the sides until smooth. I used a wallpaper brush to gently go over the top of the paper again, wiping away with a damp cloth any excess paste from the edges, trying not to get the paste on to the surface of the paper. If I did get glue on the paper, I quickly wiped it with a lightly damp cloth- And the best feature of this wallpaper? It’s dry strippable, which means you peel back a corner and pull it off in one sheet- Isn’t that awesome!! This feature alone, makes using wallpaper as a decorative wall option much more inviting!!

After the paper had dried, my husband trimmed off the wallpaper at the edges with a sharp razor blade. My husband is very precise which was so helpful with this project! I noticed after the paper had dried that some of the glue residue on the paint after wiped was still shiny. So I just touched up the paint on those areas and it all blended away.

I flipped the doors over and wallpapered the flat side so it looked more like a wall. I unrolled the paper so that it went beyond the ends about 3 inches and cut it. With a large brush, I generously brushed on the wallpaper paste then with the trusty aid of my husband, we held the paper at both ends and gently lined up the paper along the straight end and slowly laid it down while gently smoothing out the bubbles underneath with the wallpaper brush. Once dry, wallpaper was trimmed along the edges.

For the 2nd door, I laid it next to the other door, then unrolled another wallpaper panel lining it up against the other paper on the door so the pattern matched the other door as close as possible. Luckily, this pattern repeat is close, so there wasn’t much waste.

The final step was painting the hinges and I painted them with the blue color using a q-tip to dab the color onto the screws once installed.

With the bi-fold door, depending on where it is used, I was going to add some knobs or hooks to hold scarves or jewelry; in a large bath to hang a robe near the tub, or it can it can be a headboard for a twin, or queen sized bed if you do the double doors. Lots of uses for these mobile wallpaper units as I like to call them!

You can view my other posts showing steps for Walls Republic wallpaper accents on a chair and lampshade on my other posts found here: http://tayrose.com/2015/04/16/taking-a-vintage-pendant-and-adding-wallpaper-for-a-fresh-look/ http://tayrose.com/2015/04/16/how-to-wallpaper-a-bi-fold-door-to-use-as-a-headboard-or-screen/

http://www.eregalstudio.com/ credits for finished wallpaper project pictured in this post

To receive posts via email click HERE Subscribe in a reader or signup in Subscription box in sidebar.

Taking a vintage pendant lamp and adding wallpaper for a fresh look

I was given the opportunity to try a new wallpaper product from Walls Republic www.wallsrepublic.com. These particular wallpapers use a newer technology of pasting the object surface rather than pasting the paper first, cool, right? I have never really used wallpaper before besides lining drawers, so I was willing to challenge myself, and pick items that could be papered using the leftovers rather than tackle a”wall” to paper. Walls Republic have mega choices for paper in every style and color you can think of, so when you go to the site have fun! Plus they ship out up to 5 samples free, so you can see the paper in person before ordering…a nice perk!

Supplies I used for this project:

Wallpaper roll from Walls Republic pattern Adeline color Duck Egg #97411

Wallpaper adhesive paste brand Romans from Lowes (brand recommended from Walls Republic)

Wide brush or roller for pasting the adhesive

Wallpaper brush to smooth out air bubbles

scissors

ribbon and hot glue gun to attach

paint for painting inside of shade *optional, my shade just needed some freshening up

I had this vintage pendant light in my stash for years and once the wallpaper arrived, I knew this shade would be one of the perfect candidates for this project. You see, I had 3 items in mind…

lamp before wallpapering

Oh boy, this lamp was not the prettiest flower in the pot, but I could see the potential. I disassembled the lamp so I could paint the parts later, and concentrated on the shade since that was what I was going to wallpaper. I first removed the old fabric trim and since there were some age discolorations on the inside of the shade, I painted the inside. At first, I used a spray primer paint, but didn’t like how the paint was dripping, so I smoothed out the drips while still wet and let it dry before painting over with the same color paint I was going to use on the metal parts, which is from Country Chic https://www.countrychicpaint.com/paints in the Cheesecake color that matched the wallpaper background really well.

spray paint inside lampshade

Painting the inside with the mineral chalk based paint worked much better than the spray paint…just want to spare you the mis-step of using spray paint for this project. I always live and learn many times it seems, and usually from this, a much better way to do something presents itself…thank goodness! HA! While my paint brush was still wet, I went ahead and painted all the metal parts their first of several coats.

Cheesecake mineral chalkbased paint

I laid the shade on the backside of the wallpaper that I unrolled a bit, and began to roll the shade holding on to the paper end so I could determine how much paper I would need to cover the shade. I was sure to leave about an inch overlap at the end. Walls Republic suggests that ends meet rather than overlap on walls, and that makes sense, but since I was doing a lampshade, I wanted a bit of an overlay. I cut off the piece and lined up the straight edge of the paper to the edge of the lampshade. On the other side of the shade will be the extra width of the paper that will be trimmed off after I pasted down the paper. I got my large paint brush and started brushing the paste onto the shade…remember, you don’t need to apply paste to the paper but right to the surface of the object. Try to avoid getting the paste on the surface of the paper, if I did, I used a damp soft cloth to remove….

laying lampshade on wallpaper to cut to fit

I continued to paste and slowly roll the shade onto the wallpaper, smoothing gently as it rolled until the whole shade was pasted and the wallpaper was in place. Then I went back over the paper with one hand inside the shade following my other hand on the surface using the wallpaper brush to smooth out the air bubbles to the sides until the surface was smooth. Having my hand inside ensured that I didn’t press too hard on the shade and dent it. I let the shade dry before I trimmed off the excess paper on the end. Walls Republic have a nice hanging instructional that is included with the wallpaper complete with drawings which always helps us visual people!!

wallpaper on lampshade

I knew I was going to add ribbon trim to the ends of the shade, so if my cut line wasn’t exactly straight that was ok because it was going to be covered by the ribbon. I was so lucky to find only 2 ribbons that came close to matching the colors in the wallpaper and I grabbed them…plus, at Hobby Lobby, they were on sale for 50% off…can I hear an Amen!! I used the hot glue gun to attach both ribbons, first the larger ribbon in blue, then the thinner cream ribbon.

hot glue ribbon to lampshade

I reassembled all the lamp parts, after I used Windex to clean off the glass prisms, then added the shade. One last step I did was to take the creamy color paint and dry brushed the chain. I didn’t want to completely cover the whole chain with the paint, for I like to see the metal coming through. You could also make a chain cover in a color matching the fabric would be pretty too.

All finished and ready to hang..I love how it seems to breathe a fresh breath- like putting on a new floral dress after wearing long underwear for months…HA! Can you tell I live in Upstate NY?

Check out my other posts showing how I used the same wallpaper to accent a chair and and bi-fold door so they would all coordinate together.

Seeing vintage in fresh new ways is always inspiring and keeps perfectly good treasures out of the dumps!

To view the other wallpaper inspired items using Walls Republic wallpaper you can find them here: http://tayrose.com/2015/04/16/how-to-wallpaper-a-bi-fold-door-to-use-as-a-headboard-or-screen/ http://tayrose.com/2015/04/16/wallpaper-challenge-at-least-for-me/

http://www.eregalstudio.com/ credit for finished group photos on my wallpaper project with the chair, bi-fold and pendant light.

To receive posts via email click HE RE Subscribe in a reader or signup in Subscription box in sidebar.